Philips/B6X12A - Power transformer connection (Techniek Radio/TV)

door svetolik, 26.02.2011, 21:30 (5019 dagen geleden) @ soundman2

Two taps ar somewhat placed in a hole (right side of photograph) Those are the connections of a non resettable thermofuse, resistance between zero ohms when ok

There is no beep when checked resistance between these taps, so where is that thermofuse?

I have measured voltage and on the left side is the taps with 6V+ for heating.
On the right side I have measured >200V between black wire tap (Central tap on the secondary winding from the schematic?) and other taps.
All fuses seems to be ok buth radio is dead.
I have other traf with two input taps two output HV taps, one central/ ground tap and 4 taps for heating, so I need to know connections to make it work.
The old traf that is inside was hot and after vibrations there was no voltage and lights. I beliewe it is dead except section for heating voltage.
Also there is a bunch of cables that comes from input voltage switcher and that makes problem.